ACCOUNTING AND REPAYMENT PROVISIONS OF THE PICK-SLOAN MISSOURI BASIN PROGRAM1

ABSTRACT: The accounting and repayment practices employed by the Water and Power Resources Service (WPRS) greatly distort the actual resource allocation process and the ultimate repayment to the Federal Treasury. Through a series of transfers of capital repayment obligations to future development with modest or no interest charges, the repayment is reduced to only a fraction of the amount implied. In the case of the Pick-Sloan Missouri Basin Program, the public subsidy of hydroelectric power is estimated to be $2 for every $1 of repayment. For irrigation investment, the direct repayment to the Federal Treasury is less than 10 percent of the annualized cost of the public investment, with irrigators repaying at a rate of less than $0.03 for every dollar of public expenditure.     

环境空气颗粒物来源解析受体采样频率优选方法初探

环境空气颗粒物来源解析受体样品化学组成的时空差异,除受采样点位分布制约外,主要还受采样时间的制约。如何选取时间段及采样周期显得尤为重要。通过青岛市空气自动监测系统近几年获取的颗粒物连续时均值数据,采用统计优化组合选择法,筛选出日均值、年均值的最佳采样时段,可供类似研究参考。     

生活垃圾填埋场建设项目环保验收调查方法研究简

垃圾填埋场建设项目的主要环境问题包括：渗沥液排放、地下水环境污染、大气环境污染、噪声污染、景观变化和环境安全。根据工作经验,建立了包括建设项目基本情况、生态环境影响、社会环境影响、生态环境保护措施四大类调查监测指标为核心的环保验收调查指标体系,提出了文件资料核实、现场勘查、遥感调查、公众意见调查、环境监测和摄影法为主的建设项目竣工环保验收调查技术方法。     

油气田工程职业病危害控制效果评价常见问题与对策

根据建设项目职业病危害控制效果评价技术导则要求,通过对油气田地面工程职业病危害控制效果评价及职业病防护设施竣工验收的实践经验,归纳评价过程中现场调查及检测常见的实际问题及难点,总结经验,探讨解决对策,使油气田建设项目职业病危害控制效果评价更加科学、公正、客观、真实。     

建设项目竣工环保验收中公众参与的探讨

建设项目竣工环境保护验收是我国环境保护管理的重要手段。阐述了建设项目竣工环境保护验收中公众参与的法律和制度基础，竣工环保验收中公众参与不仅能维护公众的环境权益，为竣工环保验收“三同时”制度的执行提供可靠依据，还可以推动环保行政主管部门决策的民主化、科学化。研究了竣工环保验收中公众意见调查的现状及存在的问题，提出加强和规范建设项目竣工环保验收公众参与的建议。     

固定化白地霉处理高硬度及高矿化度岩溶水的研究

为了使白地霉固定化小球处理太原市地下岩溶水达到最佳絮凝效果,分别研究了白地霉菌体的最佳扩大培养条件.同时,分别选用海藻酸钠(SA)、聚乙烯醇-海藻酸钠(PVA-SA)及聚乙烯醇-海藻酸钠-明胶(PVA-SA-明胶)作为固定化剂,固定化白地霉菌体,进行絮凝性能分析.最后,确定了固定化小球处理岩溶水的最佳搅拌时间及投加量,并与六水合氯化铝、自制三元复合吸附剂及壳聚糖的5%冰醋酸溶液的絮凝效果进行了比较.结果表明,将白地霉种子培养基按3%的接种量接入白地霉扩大培养基3中进行扩大培养,可在第2d获取活性较好的大量白地霉菌体进行固定化.处理岩溶水时应选用PVA-SA-明胶固定化的白地霉小球,并在其投加量为4g·L-1、搅拌时间为60min时,对岩溶水矿化度、硬度的最大絮凝率分别为96.88%、50.00%.经与化学混凝剂絮凝性能对比发现,微生物絮凝剂具有操作简便、无二次污染、絮凝效果较好的优点.     

论长江上游干流区持续发展保障工程主体系

长江上游干流区是我国的重要待开发区域，但开发发展基础甚差，创建支撑开发和促成实现持续发展保障工程体系是首要任务。本区持续发展的主要保障工程体系包括：建设包括沿江铁路和高等级公路及港口在内的现代化综合交通运输体系，丰裕的能源尤其电力供给系统和先进的通讯网络系统；     

建设项目竣工环境保护验收监测的内涵、缺陷及对策

在环境换取经济增长向环境优化经济增长转变的新形势下,应拓展建设项目环境保护设施竣工验收监洲的内涵.指出目前的竣工验收监测对工业生产型建设项目的制约因素考虑不周、忽视了"三同时"的全过程、忽视了非工业生产型建设项目和区域性开发项目、忽视了无组织排放污染源.提出要创新治理设施竣工验收监测理念、优化竣工验收监测方法、强化竣工验收生态监洲技术的研究、开展区域性建设项目的验收监测.     

Exploring the perceived influence of safety management practices on project performance in the construction industry

Although safety management is known to be vital to construction projects, very few studies have solicited views from construction practitioners about their perceptions of which safety management practices (SMPs) are important to construction projects and related to project performance. An empirical study was undertaken in Hong Kong in order to shed more light on this topic. In the study, the importance levels of 15 popular SMPs and five project performance criteria were rated by 232 respondents. An exploratory factor analysis was conducted, and three SMP categories - information, process, and committees - were extracted. Of these three categories, safety management process was perceived by the construction practitioners as being the most important, followed by safety management information and committees. Moreover, the effect of the three SMP categories on a composite project performance variable was tested using hierarchical regression analysis. Results indicate that the “information” and “committees” categories were associated with project performance positively and significantly. One of the major conclusions of the study is that the construction industry has paid relatively less attention to safety management committees, which were empirically analyzed as having a strong perceived impact on project performance. In order to improve project performance, construction companies should promote the criticality of safety management committees.     

絮凝剂用壳聚糖的中试生产研究

在实验室制备絮凝剂用壳聚糖的基础上,按工业化生产的要求对壳聚糖进行了中试生产研究.经正交试验确定了生产过程中脱钙、脱蛋白、脱乙酰等3步反应的最佳工艺参数. 由此中试工艺生产的壳聚糖的生产成本比国内同类产品下降了22%,生产周期缩短了66%,且主要性能指标均达到或超过国内外同类产品的水平.